DIY: Staple Tote Bag

 You will need:

1.Tape (Use Duct Tape. I used another tape... mistake!)

2. Scissors

3. Fabric ( Mine was 30 in x 20 in)

4.2 1 in Strips of fabric (You will use this as the strap... Mine were 20 in.)

5. a Stapler (sorry it wasn't in the picture)

Start off by ironing out the fabric so there are no creases or crinkles.

Then fold the fabric in half. You can fold it so that the bag is wide or narrow.

The cut it in half! We're almost there!

Staple the strap onto the edge of the outside of you bag and repeat! and repeat!

To make it easier I ironed the edge with the staple to be on the inside of the bag.

Now it's time to staple! Staple along the edge and make sure that

what will be the outside of the purse is on the inside (you know what I mean)

make sure that the good sides are facing each other.

Staple along the edges all around make sure it goes through.

BAM!!! Now we are done with that.

Ready. Set. Tape!

Now one side is done on to the next one.

Now we are finished with that.

Turn it inside out and Voilà!

Fin!

by Miss Glamorazzi @ YouTube.com... 

Sorry the post is so long. 

I just wanted to make sure everyone understood.